field application of crushed granite as a fine aggregate replacement

Partial Replacement of Aggregates with Ceramic Tiles and ...

The crushed tile aggregate passing through 16.5mm sieve and retained on 12mm sieve are used. Crushed tiles were partially replaced in place of coarse aggregate by the percentages of 10%, 20% and 30%, 40% and 50% individually and along with replacement of fine aggregate with granite powder also. 2.1.6 CERAMIC TILE-FINE AGGREGATE:

Experimental Study on Partial Replacement of Fine ...

of granite fines to fine aggregate are 0, 10, 20, 30, 40, 50 and 100 for M20 mix proportions, specimens are tested after 28 days of curing, for compression strength, flexural and split tensile strength. The specimen casted with 40 % replacement of granite fines to fine aggregate gives higher strength when compared to control specimen.

VALLUR,PRAKASAM(Dt).

Crushed waste ceramic tiles, crushed waste ceramic tile powder and Granite powder are used as a replacement to the coarse aggregates and fine aggregate. The ceramicwaste crushed tiles were partially replaced in place of coarse aggregates by 10%, 20%, 30%, 40% and 50%.Granite powder and ceramic tile powder were

Glass Wastes as Coarse Aggregate in Concrete

Coarse Aggregate Coarse aggregate are the crushed stone used for making concrete. The commercial stone is quarried, crushed and graded. Much of the crushed stone used is granite, limestone and trap rock. Crushed angular granite metal of 10 mm size from a local source was used as coarse aggregate. The specific gravity of 2.6 and fineness modulus ...

IRJET-Experimental Study on Partial Replacement of Fine ...

PROPERTIES AND MATERIAL USED aggregate having a fineness modulus of approximately 4.0%. 3.1 Cement Bulking obtained for crushed stone aggregate was 47.5% while for coconut shell powder bulking was around 35% ISI marked OPC 53 Grade cement was used in this work with which is much lower to that of crushed stone aggregate. specific gravity of 2.74 ...

Use of Recycled Aggregates in Construction

2 Use of Recycled Aggregates in Construction Contents EXECUTIVE SUMMARY 3 1 INTRODUCTION 6 1.1 General 6 1.2 Classification of Aggregates 6 2 MANUFACTURED AGGREGATES 7 2.1 Foamed Blast Furnace Slag (FBS) 7 2.2 Fly Ash Aggregates 8 2.3 Manufactured Sand 8 2.4 Polystyrene Aggregate 9 2.5 Expanded Clays, Shales and Slates 10 3 RECYCLED AGGREGATES 10

Utilization of Construction Waste Tiles as a Replacement ...

In concrete production, Portland cement, river sand, 4-32 mm in size crushed stone and crushed tile as coarse aggregates in the replacement ratio of 0, 50 and 100 % were used. Mechanical and ...

Use of Crushed Granite Fine as Replacement to River Sand ...

The use of only Makurdi river sand as fine aggregate and gravel to produce grade C 35 concrete will cost N 16,559 a value lower than N 16,580 and N 16,622 obtained with the use of Makurdi river sand partially replaced with 10% and 30% crushed granite fine respectively.

Partial Replacement of Aggregates with Ceramic Tiles and ...

The crushed tile aggregate passing through 16.5mm sieve and retained on 12mm sieve are used. Crushed tiles were partially replaced in place of coarse aggregate by the percentages of 10%, 20% and 30%, 40% and 50% individually and along with replacement of fine aggregate with granite powder also. 2.1.6 CERAMIC TILE-FINE AGGREGATE:

Experimental Study on Partial Replacement of Fine ...

of granite fines to fine aggregate are 0, 10, 20, 30, 40, 50 and 100 for M20 mix proportions, specimens are tested after 28 days of curing, for compression strength, flexural and split tensile strength. The specimen casted with 40 % replacement of granite fines to fine aggregate gives higher strength when compared to control specimen.

Aggregates from Natural and Recycled Sources

Nationally, consumption of recycled aggregates from crushed concrete increased 170 percent between 1994 and 1996, but constituted less than 0.4 percent of total aggregates consumed in 1995. The supply of construction debris is regional, and is determined by local infrastructure decay and replacement rates. Aggregate recycling rates are greatest in

An application on the Effect of Recycle Coated Crushed ...

recycled aggregate, partial replacement coarse aggregate, wire mesh, waste materials, crushing loads. ... been made to propose a sensible answer for genuine field application. A test study has been led to check different ... Investigation on Partial Replacement of Fine Aggregate Using Crushed Spent Fire Bricks. This task clarifies about

A STUDY ON RECYCLED CONCRETE AGGREGATES

crushed at ages 1, 3 and 28 days to serve as a source of aggregate for new concrete, simulating the situation prevailing in precast concrete plants. The properties of the recycled aggregate and of the new concrete made from it, with nearly 100% of aggregate replacement, were tested. The properties of the concrete made with recycled

VARIATION IN STRENGTH PROPERTIES OF CONCRETE USING

matters. Fine aggregate used was river sand while crushed granite of maximum nominal particle size of 20 mm was used as coarse aggregate. The grading for the aggregates was done according to [11]. The uniformity coefficient (Cu) for the sand and granite were 5.4 and 5 respectively while their coefficients of curvature (Cc) were

Choice Of Quarry Rock Dust Over Natural Sand As Fine Aggregate

Improved Concrete Properties Using Quarry Dust as Replacement for Natural Sand 52 VII APPLICATIONS 1 The quarry dust is widely used in construction industry 2 Quarry dust is used as a fine aggregate in Concrete for paving blocks of good permeability capacity and high grade concrete productions concrete. Send Email: [email protected]

A Review on Recycled Aggregates for the Construction Industry

The stone slurry from the stone industry was collected, dried and converted into a powdery from to produce a total of 8 concrete sample blocks with 0, 10, 15, 20, 34, 67, and 100% replacement of fine aggregate with stone dust.

(PDF) Use of glass wastes as fine aggregate in Concrete

The study indicated that waste glass can effectively be used as fine aggregate replacement (up to. 40%) without subs tantial change in strength. Keywords: Glass, recycling, concrete, construction ...

What are the advantages of partial replacement of fine ...

Reduction of cost and utilisation of waste materials. Sand is becoming extremely expensive now. Materials such as artificial sand are being introduced into the market at large scale that reduce the cost burden of river sand on concrete considerabl...

Crushed Glass - Mikes Trucking

Crushed recycled glass can be used as a complete fine aggregate replacement in concrete, Glass aggregate can replace part or all of the sand and gravel in concrete, for effects that range from colorful terrazzo, to granite- or marble-like finishes, to concrete that reflects light like a mirror. Glass aggregate can even be used to produce ...

Fresh and hardened properties of high-strength concrete ...

Feb 10, 2021 · This paper presents the fresh and hardened properties of high-strength concrete comprising byproduct fine crushed aggregates (FCAs) sourced from the crushing of three different types of rocks, namely granophyre, basalt, and granite. The lowest void contents of the combined fine aggregates were observed when 40% to 60% of natural sand is replaced by the FCAs. By the replacement

MECHANICAL PROPERTIES OF CONCRETE USING COCONUT

focus was made on the coarse aggregates and an attempt was made to replace th e conventional coarse aggregates using coconut shells in concrete. A control mix was designed for M 25 grade of co ncrete and then the crushed granite aggregates were replaced with coconut shells by volume in different levels such as 20%, 40 %, 60%, 80% and 100%.

Partial Replacement of Fine Aggregate & Coarse Aggregate ...

environment. Fine aggregates generally consist of natural sand or crushed stone with most particles passing through a 9.5mm sieve. As with coarse aggregates these can be from Primary, Secondary or Recycled sources. 3.3 Coarse Aggregates Coarse aggregates are particles greater than 4.75mm, but generally range between 9.5mm to 37.5mm in diameter.

Partial replacement of Fine Aggregate By using Spent Fire ...

The waste tiles were crushed into small pieces by manually and by using crusher. The required size of crushed tile aggregate was separated to use them as partial replacement to the natural coarse aggregate. The tile waste which is lesser than 4.75 mm size was neglected. The crushed tile aggregate passing through 16.5mm sieve and

An Experimental Investigation On Behaviour Of Concrete By ...

coarse aggregate. This polished granite Tile waste is crushed manually in to 20 mm size coarse aggregate for partial replacement with Natural coarse aggregate of 20 mm size. Quartz-Sandstone Powder Fine Aggregate- Quartz-sandstone is a sandstone consisting of more than 95% quartz class and below 5% matrix. Sandstone is a

An Experimental Study on Partial Replacement of Sand with ...

Ordinary Portland cement of 43 grade conforming to IS 8112 was used throughout the work. The fine aggregate used in this investigation was clean river sand, whose maximum size is 4.75 mm, conforming to grading zone II. Machine crushed blue granite stone angular in shape was used as coarse aggregate.

Dolomite rock sand as fine aggregate replacement in ...

Jan 01, 2021 · Specific gravity of fine aggregate is the ratio of the weight of given volume of aggregates to the weight of equal volume of water. Specific gravity of fine aggregates (crushed sand and Dolomite Rock Sand) were found by using a pycnometer and the test standards were ensured to conform with IS 2386 (Part 3) 1963. The results are presented in Fig. 1.

Partial Replacement of Fine Aggregate and Coarse

concrete. Fine aggregate are basically sands won from the land or the marine environment. Fine aggregates generally consist of natural sand or crushed stone with most particles passing through a 9.5mm sieve. As with coarse aggregates these can be from Primary, Secondary or Recycled sources. 2.1.3 COARSE AGGREGATES

Aggregate - Illinois Department of Transportation

Aggregates focuses on: natural sands, gravels, crushed gravels, crushed stone, steel slag, air cooled blast furnace (ACBF) slag, recycled crushed concrete, rip rap, reclaimed asphalt pavement (RAP) used as aggregate. Qualified Product Lists. Procedures.

Replacement of Natural Sand in Concrete by Polyethylene ...

aggregates used are 20mm and that of fine aggregates are of ZONE-II as given Aggregates Fine aggregates coarse aggregates Type River sand (Zone II) Crushed granite Maximum nominal size — 20mm Specific gravity 2.60 2.65 Bulk density (kg/m3) 1700 1800 Fineness modulus 2.3 6.0 Free surface moisture (%) 2.0 1.0 4.3 PET Fiber:

The Complete Guide to Crushed Stone and Gravel

Nov 11, 2019 · Like crushed stone, gravel can be used as an aggregate for pavement, ready mix concrete, or other construction applications. Best applications for crushed stone We have already referenced many places where crushed stone is used, but the most common are construction projects that need concrete, solid bases, or drainage systems.

Study on Compressive Strength of Quarry Dust as Fine ...

Jul 28, 2016 · The concept of replacement of natural fine aggregate by quarry dust which is highlighted in the study could boost the consumption of quarry dust generated from quarries. By replacement of quarry dust, the requirement of land fill area can be reduced and can also solve the problem of natural sand scarcity. The availability of sand at low cost as a fine aggregate in concrete is not suitable and ...

CIVL 1101 - Part 6 - Concrete Agregates

CIVL 1101 - Part 6 - Concrete Agregates. Part 6. Concrete Aggregates. Aggregates generally occupy 70 to 80% of the volume of concrete and therefore have a significant effect on its properties. Strength of concrete and mix design are independent of the composition of aggregate, but durability may be affected. Aggregates are classified based on ...

Use of Recycled Aggregates in Construction

2 Use of Recycled Aggregates in Construction Contents EXECUTIVE SUMMARY 3 1 INTRODUCTION 6 1.1 General 6 1.2 Classification of Aggregates 6 2 MANUFACTURED AGGREGATES 7 2.1 Foamed Blast Furnace Slag (FBS) 7 2.2 Fly Ash Aggregates 8 2.3 Manufactured Sand 8 2.4 Polystyrene Aggregate 9 2.5 Expanded Clays, Shales and Slates 10 3 RECYCLED AGGREGATES 10

International Journal for Research in Engineering ...

3.2 Fine Aggregate: regionally out there natural sand is employed as fine mixture. The sieve analysis distributed in accordance with IS 2386 (Part 1)-1963. 3.3 Granite and Brick Aggregates: Natural crushed twenty millimeter single sized granite mixture was utilized in the investigation so comparisons might be created with

Decomposed Granite, Gravel near Tishomingo, OK - Blessing ...

Based in Tishomingo, in the heart of the granite quadrangle, Blessing Gravel distinguishes itself by providing precision-processed decomposed granite (DG), decorative stone and boulders, and other aggregates used in numerous industries. We also offer transportation services to deliver our products affordably and on schedule.

Copyright © 2020.Company name All rights reserved.SiteMap